{"id":2541,"date":"2026-07-01T06:03:16","date_gmt":"2026-07-01T06:03:16","guid":{"rendered":"https:\/\/hydrauliccylindersprice.com\/product\/small-excavator-stick-cylinder-arm-cylinder\/"},"modified":"2026-07-01T06:03:18","modified_gmt":"2026-07-01T06:03:18","slug":"small-excavator-stick-cylinder-arm-cylinder","status":"publish","type":"product","link":"https:\/\/hydrauliccylindersprice.com\/bg\/product\/small-excavator-stick-cylinder-arm-cylinder\/","title":{"rendered":"Small Excavator Stick Cylinder (Arm Cylinder)"},"content":{"rendered":"

<\/p>\n

<\/p>\n

\n \"Small<\/p>\n
\n Small Excavator \u00b7 2nd of 5<\/span><\/p>\n

Small Excavator Stick Cylinder
(Arm Cylinder)<\/span><\/h2>\n

The reach controller. The stick cylinder pushes the forearm outward to place the bucket at the digging face, then pulls it back to drag the bucket through the soil. Digging depth, horizontal reach, and the shape of the trench profile \u2014 all set by the stick cylinder’s stroke and force.<\/p>\n

\n
50\u2013115mm<\/span>Bore<\/span><\/div>\n
305 KN<\/span>Max Thrust<\/span><\/div>\n
29.4 MPa<\/span>Pressure<\/span><\/div>\n
\u22641,000mm<\/span>Stroke<\/span><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/section>\n

<\/p>\n

\n

The Reach Controller \u2014 How the Stick Cylinder Determines Digging Geometry<\/span><\/h2>\n
\n \"Small<\/p>\n

The boom cylinder (#3) sets the vertical height of the arm assembly \u2014 how high or low the arm reaches. The stick cylinder sets the horizontal distance \u2014 how far forward or backward the bucket extends from the boom’s tip pivot. Together, the boom and stick cylinders define the excavator’s working envelope: a crescent-shaped zone in which the bucket can reach any point.<\/p>\n<\/div>\n

The stick’s contribution to digging depth is critical. When the boom is lowered and the stick is fully extended, the bucket reaches its maximum depth below grade. Each additional 100 mm of stick cylinder stroke adds approximately 70\u201390 mm to the machine’s maximum digging depth (depending on the linkage geometry). For a small excavator, this can mean the difference between reaching the bottom of a utility trench in one pass or needing to bench down in two passes \u2014 doubling the trenching time.<\/p>\n

The stick cylinder’s 305 KN maximum thrust (20% more than the bucket cylinder’s 255 KN) reflects the heavier loading: the stick cylinder must push the combined weight of the stick plus the bucket plus the bucket’s soil load through the digging arc. Korea Ever-Power manufactures the stick cylinder as the second of five small excavator hydraulic cylinders<\/a>.<\/p>\n<\/section>\n

<\/p>\n

\n

Technical Specifications<\/span><\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nSpecification<\/th>\n<\/tr>\n<\/thead>\n
Product<\/td>\nSmall Excavator Stick Cylinder (Arm Cylinder)<\/td>\n<\/tr>\n
Function<\/td>\nControl the movement of the forearm (reach \/ retract)<\/td>\n<\/tr>\n
Bore Diameter<\/td>\n50 mm \u2013 115 mm<\/td>\n<\/tr>\n
Rod Diameter<\/td>\n25 mm \u2013 70 mm<\/td>\n<\/tr>\n
Stroke<\/td>\n\u2264 1,000 mm<\/td>\n<\/tr>\n
Max Thrust<\/td>\n305 KN (bore 115 mm \/ 29.4 MPa)<\/td>\n<\/tr>\n
Application<\/td>\nSmall Excavator (1\u201310 tonne class)<\/td>\n<\/tr>\n
Certification<\/td>\nISO 9001 \u00b7 100% hydrostatic tested<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/section>\n

<\/p>\n

\n
\n

Pull-Back Force \u2014 The Retraction Stroke Does the Real Digging<\/h2>\n

On most excavators, the digging force comes not from the extension stroke (pushing the stick outward) but from the retraction stroke (pulling the stick back toward the machine). The operator pushes the stick out to position the bucket at the far side of the trench, then pulls it back \u2014 dragging the bucket through the soil toward the machine. This retraction motion generates the digging breakout force that cuts and fills the bucket.<\/p>\n

\n
\n Retraction force \u2014 annular area \u00d7 pressure<\/strong><\/p>\n

The retraction force is produced by the annular piston area (bore area minus rod area). With a 115 mm bore and 70 mm rod, the annular area is approximately 6,540 mm\u00b2 \u2014 producing about 192 KN of pull-back force at 29.4 MPa. This retraction force is the excavator’s “arm breakout force” in the machine’s specification sheet \u2014 a key performance metric that operators use to compare excavator digging power.<\/p>\n<\/p><\/div>\n

\n Rod-to-bore ratio \u2014 balancing dig force and speed<\/strong><\/p>\n

A thicker rod increases extension force but reduces retraction force and speed. A thinner rod does the opposite. Korea Ever-Power optimises the rod diameter for each excavator model’s digging pattern \u2014 balancing the arm breakout force (retraction) against the arm crowd force (extension) and the retraction speed (which determines cycle time). Contact the Korea Ever-Power engineering team<\/a> for rod ratio optimisation.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/section>\n

<\/p>\n

\n \"Excavator
\n<\/section>\n

<\/p>\n

\n

Confined-Space Digging \u2014 Why Small Excavators Demand Compact Cylinders<\/span><\/h2>\n
\n \"Small<\/p>\n

Small excavators (1\u201310 tonnes) work where larger machines cannot fit: inside buildings, between fences in residential gardens, in narrow alleys, and around underground utilities where every centimetre of clearance matters. The stick cylinder must produce adequate digging force from the smallest possible physical size \u2014 the cylinder’s overall length, barrel diameter, and mounting lug protrusion all affect the machine’s ability to operate in tight spaces.<\/p>\n<\/div>\n

Zero-tail-swing and reduced-tail-swing excavators \u2014 designed specifically for confined urban work \u2014 impose even tighter cylinder packaging constraints. The stick cylinder must fit within the narrower arm cross-section of these compact machines without sacrificing bore diameter (which would reduce digging force). Korea Ever-Power achieves this by minimising the barrel wall thickness to the structural minimum for the 29.4 MPa working pressure \u2014 every millimetre of wall thickness saved translates directly into machine compactness.<\/p>\n

Bore honed to Ra 0.2\u20130.4 \u00b5m. Chrome plating 50\u201380 \u00b5m. Seals rated -30 \u00b0C to +80 \u00b0C. Every stick cylinder is hydrostatic tested at 1.5\u00d7 rated pressure (44.1 MPa) and function-tested for smooth extension and retraction across the full stroke.<\/p>\n<\/section>\n

<\/p>\n

\n

OEM & ODM<\/span><\/h2>\n
\n
\n
What You Provide<\/strong><\/div>\n
\n

Excavator model and weight class, stick length and weight, required arm breakout force (retraction), required arm crowd force (extension), bore\/rod\/stroke or force requirement, system pressure, pin diameters, arm cross-section envelope (for compact machines), and the stick linkage assembly drawing.<\/p>\n<\/div><\/div>\n

\n
What the Factory Delivers<\/strong><\/div>\n
\n

Engineering drawing with bore, rod (optimised ratio), stroke, compact barrel wall, seal specification, chrome plating detail, and mounting dimensions. Hydrostatic + full-stroke functional test. Seal kits. Browse the mobile machinery hydraulic cylinder family<\/a> and the Korea Ever-Power catalogue<\/a>.<\/p>\n<\/div><\/div>\n<\/p><\/div>\n

\"Korea
\n<\/section>\n

<\/p>\n

\n

FAQ<\/span><\/h2>\n
\n
\n

Why is the stick cylinder also called the arm cylinder?<\/h3>\n

Industry terminology varies by region. In Japan and Korea, the component is called the “arm” (\u30a2\u30fc\u30e0); in North America and Europe, it is commonly called the “stick” or “dipper stick.” The cylinder controlling it inherits either name. Korea Ever-Power uses both terms interchangeably. The function is identical regardless of terminology.<\/p>\n<\/p><\/div>\n

\n

How does the stick cylinder affect digging depth?<\/h3>\n

The stick cylinder’s stroke directly determines the excavator’s maximum digging depth below grade. A longer stick cylinder stroke allows the bucket to reach deeper \u2014 each additional 100 mm of stroke adds approximately 70\u201390 mm of digging depth. For a 5-tonne mini excavator, the difference between a 700 mm and 900 mm stick stroke can mean reaching a 3.0 m utility trench versus only a 2.6 m trench.<\/p>\n<\/p><\/div>\n

\n

Does the stick cylinder need the same impact protection as the bucket cylinder?<\/h3>\n

Less intense, but still significant. The stick cylinder is mounted at mid-height on the arm \u2014 partially shielded from the direct ground contact and debris packing that the bucket cylinder endures. However, the stick cylinder still experiences shock loads when the bucket hits buried obstacles, and vibration from continuous digging cycles. Standard double-lip wipers (rather than the hardened-scraper wipers used on the bucket cylinder) are sufficient for the stick position. Browse telescopic cylinders<\/a> and forklift cylinders<\/a>.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/section>\n

\n

Related Categories<\/span><\/h2>\n
<\/p>\n
\n
\"Telescopic\"<\/div>\n
\n
Telescopic Hydraulic Cylinders \u2192<\/div>\n
Dump truck, trailer, hoist.<\/div>\n<\/div>\n<\/div>\n

<\/a><\/p>\n

\n
\"Forklift\"<\/div>\n
\n
Forklift Hydraulic Cylinders \u2192<\/div>\n
Lift, tilt, steer \u2014 OEM.<\/div>\n<\/div>\n<\/div>\n

<\/a><\/p>\n

\n
\"AWV\"<\/div>\n
\n
Aerial Work Vehicle Cylinders \u2192<\/div>\n
Scissor, boom, platforms.<\/div>\n<\/div>\n<\/div>\n

<\/a><\/div>\n<\/section>\n

<\/main><\/p>","protected":false},"excerpt":{"rendered":"

Small excavator stick cylinder (also called arm cylinder) \u2014 the hydraulic actuator that controls the forearm (stick) of the excavator, pushing the bucket forward to extend the digging reach and pulling it back to retract. The stick cylinder determines how deep and how far the excavator can dig \u2014 it is the “reach controller” of the three-cylinder digging arm. Bore 50\u2013115 mm, rod 25\u201370 mm, stroke \u22641,000 mm, thrust 305 KN at 29.4 MPa. Korea Ever-Power. ISO 9001. OEM & ODM.<\/div>","protected":false},"featured_media":2542,"comment_status":"closed","ping_status":"open","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[854],"product_tag":[],"class_list":["post-2541","product","type-product","status-publish","has-post-thumbnail","product_cat-mobile-machinery-hydraulic-cylinders","pa_editor-cxm","first","instock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/product\/2541","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/comments?post=2541"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/media\/2542"}],"wp:attachment":[{"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/media?parent=2541"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/product_brand?post=2541"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/product_cat?post=2541"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/bg\/wp-json\/wp\/v2\/product_tag?post=2541"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}