{"id":2283,"date":"2026-06-26T07:40:35","date_gmt":"2026-06-26T07:40:35","guid":{"rendered":"https:\/\/hydrauliccylindersprice.com\/?post_type=product&p=2283"},"modified":"2026-06-26T07:46:12","modified_gmt":"2026-06-26T07:46:12","slug":"mini-dump-truck-hydraulic-cylinder-telescopic","status":"publish","type":"product","link":"https:\/\/hydrauliccylindersprice.com\/da\/vare\/mini-dump-truck-hydraulic-cylinder-telescopic\/","title":{"rendered":"Mini Dump Truck Hydraulic Cylinder \u2014 Telescopic, Direct Sales"},"content":{"rendered":"
\n

<\/p>\n

\n
\n
\n
MINI DUMP TRUCK<\/span>
\nDIRECT SALES<\/span><\/div>\n

Mini Dump Truck
\nHydraulic Cylinder
\nTelescopic \u2014 Factory Direct<\/span><\/h2>\n

A mini dump truck weighs what a highway hauler carries. The chassis is 300\u2013500 mm wide, the dump body holds half a tonne to two tonnes, and the entire vehicle fits on roads and job sites where a full-size truck cannot go. The telescopic hydraulic cylinder<\/a> for this class must be proportionally miniature \u2014 lightweight enough for one-person handling, narrow enough to fit between micro-scale chassis rails, and short enough when retracted to disappear within the vehicle’s underframe.<\/p>\n<\/div>\n

\n
\n
\n
Mini<\/div>\n
Dump Truck Class<\/div>\n<\/div>\n
\n
2\u20136\u2033<\/div>\n
Bore Range<\/div>\n<\/div>\n
\n
4\u2013100\u2033<\/div>\n
Stroke Range<\/div>\n<\/div>\n
\n
Direct<\/div>\n
Factory Sales<\/div>\n<\/div>\n<\/div>\n
Steel Body<\/span>
\nISO 9001<\/span>
\nG \/ SAE \/ NPT \/ M<\/span>
\nOEM & ODM<\/span><\/div>\n
<\/div>\n
\"Strong<\/div>\n<\/div>\n
<\/div>\n<\/div>\n

Korea Ever-Power manufactures telescopic hydraulic cylinders for the full range of mini dump trucks \u2014 from sub-1 tonne electric utility carts to 3.5 tonne compact tippers. The cylinder is custom-engineered to match your specific mini truck frame dimensions, hydraulic system pressure, and tipping angle requirement. Direct sales from the factory: your specification goes to the engineering team, your cylinder ships from the production floor, and your pricing reflects manufacturing cost without distributor mark-up.<\/p>\n<\/section>\n

\u00a0\"Telescopic<\/p>\n

\n

Mini Dump Truck Telescopic Cylinder \u2014 Customisation Parameters<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n
Bore Size<\/td>\n2\u20136 inch (customisable)<\/td>\n<\/tr>\n
Rod Size<\/td>\n1.125\u20134 inch (customisable)<\/td>\n<\/tr>\n
Stroke Size<\/td>\n4\u2013100 inch (customisable)<\/td>\n<\/tr>\n
Pin Size<\/td>\n0.5\u20132 inch (customisable)<\/td>\n<\/tr>\n
Port Options<\/td>\nG (BSP) \/ SAE \/ NPT \/ M (metric)<\/td>\n<\/tr>\n
Body \/ Type<\/td>\nSteel \/ Multi-stage telescopic<\/td>\n<\/tr>\n
Target Vehicle<\/td>\nMini dump trucks, micro tippers, electric utility carts (<3.5t)<\/td>\n<\/tr>\n
Certification \/ Lead Time<\/td>\nISO 9001 \/ 25\u201335 days<\/td>\n<\/tr>\n
Warranty<\/td>\n1 year<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n

<\/p>\n

\"Mini<\/section>\n

<\/p>\n

\n

Engineering a Telescopic Cylinder for Mini Dump Trucks \u2014 Three Constraints<\/h2>\n

Mini dump trucks impose constraints that larger vehicles do not. The cylinder must be engineered within these limits \u2014 and the constraints are dimensional, not force-related. Even a 2-inch bore telescopic cylinder at standard working pressures produces far more force than needed to tip a 1\u20132 tonne mini dump body. The engineering challenge is fitting the cylinder into the space available.<\/p>\n

\n
\n

Narrow Frame Width (300\u2013500 mm)<\/strong><\/p>\n

Mini truck chassis rails are narrower than the width of a standard dinner plate. The telescopic cylinder’s outer barrel diameter must fit within these rails with clearance for hydraulic hoses, wiring, and suspension components. At the smaller bore range (2\u20132.5 inch), the outer barrel diameter is typically 70\u201390 mm \u2014 compact enough for most mini truck frames.<\/p>\n<\/div>\n

\n

Shallow Frame Depth (250\u2013400 mm)<\/strong><\/p>\n

The vertical depth from the frame rail top flange to the underside is only 250\u2013400 mm on mini trucks \u2014 the retracted cylinder must fit within this envelope. A 2-stage telescopic cylinder at 18\u201324 inch stroke retracts to approximately 10\u201316 inches (250\u2013400 mm), which matches this mini truck frame depth precisely. This is why 2-stage is the most common telescopic configuration for mini trucks.<\/p>\n<\/div>\n

\n

Low Weight Requirement<\/strong><\/p>\n

Mini dump trucks have limited payload capacity \u2014 every kilogram of hoist equipment subtracts from the payload. A 2-stage telescopic cylinder at 2-inch bore weighs approximately 3\u20136 kg depending on stroke length. This lightweight is essential for mini trucks where the total vehicle GVW may be 1,500\u20133,500 kg and the cylinder weight as a percentage of GVW is proportionally higher than on a 20-tonne truck.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Mini Dump Truck Categories<\/h2>\n

\"Mini<\/p>\n

\n
\n

Electric Utility Dump Carts<\/h3>\n

Battery-electric utility vehicles for golf courses, resorts, campus maintenance, and warehouse grounds. Sub-1 tonne payload, 12V or 24V DC hydraulic power unit. The telescopic cylinder must operate on the lower pressures typical of small electric pumps. 2-stage at 2-inch bore, 12\u201318 inch stroke \u2014 the smallest telescopic cylinder in the product line.<\/p>\n<\/div>\n

\n

Kei-Class & Micro Tippers<\/h3>\n

Kei trucks (Japanese 660cc class), Chinese mini trucks, Indian three-wheeler tippers, and European L-category commercial vehicles. GVW under 2 tonnes, frame width 350\u2013450 mm. The telescopic cylinder must fit within the micro-scale chassis rails while delivering a useful tipping angle. Metric or BSP ports to match the PTO hydraulic system.<\/p>\n<\/div>\n

\n

Compact Site Dumpers<\/h3>\n

Walk-behind and ride-on site dumpers used on construction sites for short-distance material transport. These vehicles tip forward (over the front of the machine) rather than rearward. The telescopic cylinder mounts at the front and pushes the skip body forward and over. 2-stage at 2\u20133 inch bore, typically single-acting with gravity return.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

OEM & ODM \u2014 Direct Sales Process<\/h2>\n
\n
\n
\n

What You Provide<\/h3>\n<\/div>\n
\n

Bore, rod, stroke, retracted length, mounting type, port thread, working pressure, and mini truck model or frame dimensions. For electric vehicles: specify whether the hydraulic pump is 12V or 24V DC, as this determines the operating pressure range. For replacements: old cylinder measurements or sample.<\/p>\n<\/div>\n<\/div>\n

\n
\n

What Ever-Power Delivers<\/h3>\n<\/div>\n
\n

Drawing 2\u20133 days. Samples available. Production 25\u201335 days. 100% pressure test with certificate. 1-year warranty. Direct sales \u2014 no distributor margin. Contact Korea Ever-Power<\/a> for quotation. MOQ negotiable \u2014 single-unit replacements accepted.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Mini Dump Truck Telescopic Cylinder \u2014 Technical FAQ<\/h2>\n
\n
\n

What is the smallest telescopic cylinder Korea Ever-Power can manufacture?<\/h3>\n

The manufacturing range starts at 2-inch bore. A 2-stage telescopic cylinder at 2-inch bore with 12-inch stroke is the smallest standard configuration \u2014 suitable for electric utility dump carts and micro tippers with sub-500 kg payloads. For bore sizes below 2 inch, contact the factory engineering team to discuss feasibility for your specific application.<\/p>\n<\/div>\n

\n

Can this cylinder work with a 12V DC hydraulic power unit?<\/h3>\n

Yes. Many mini dump trucks and electric utility vehicles use 12V DC hydraulic power units with small gear pumps. The telescopic cylinder must be rated for the operating pressure that the 12V pump produces \u2014 typically lower than the pressures generated by PTO-driven pumps on larger trucks. Specify your power unit’s operating pressure when ordering so the cylinder is designed to operate efficiently within that pressure range.<\/p>\n<\/div>\n

\n

How heavy is a mini-size telescopic cylinder?<\/h3>\n

Weight depends on bore and stroke, but a typical mini dump truck cylinder (2-inch bore, 2-stage, 18\u201324 inch stroke) weighs approximately 3\u20136 kg. This is light enough for one-person handling and installation without lifting equipment \u2014 an important practical advantage for mini truck workshops that typically do not have overhead cranes.<\/p>\n<\/div>\n

\n

Do you supply telescopic cylinders for forward-tipping site dumpers?<\/h3>\n

Yes. Forward-tipping site dumpers (where the skip tips over the front of the machine) use telescopic cylinders mounted at the front of the skip, pushing forward and over. The cylinder specification is the same as rear-tipping \u2014 bore, stroke, port thread, mounting type \u2014 but the mounting orientation and tipping direction are different. Specify “forward tip” in your order so the port and mounting positions are configured correctly for front-mounted operation.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Field Reports<\/h2>\n
\n
\n
\n
T<\/div>\n
\n
Takeshi N. \u2014 Kei Truck Dump Body Maker<\/div>\n
Verified Purchase \u00b7 Japan \u00b7 April 2025<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

We manufacture dump bodies for Kei-class mini trucks \u2014 660cc engine, 350 kg payload, frame width 380 mm. The Ever-Power 2-stage at 2-inch bore, 16-inch stroke fits perfectly. Outer barrel diameter is only 72 mm \u2014 well within our frame rail clearance. 40 units delivered over 8 months, every one within 1 mm of the drawing. Each cylinder weighs 3.2 kg \u2014 our assemblers install them by hand. Metric ports, single-acting. Zero warranty returns.<\/p>\n<\/div>\n

\n
\n
M<\/div>\n
\n
GreenCart EV \u2014 Electric Utility Vehicle Manufacturer<\/div>\n
Verified Purchase \u00b7 Netherlands \u00b7 February 2025<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

We build battery-electric utility dump carts for golf courses and resort properties. Our vehicles use a 24V DC hydraulic power unit at 120 bar operating pressure. The Ever-Power 2-stage telescopic cylinder at 2-inch bore works perfectly at this pressure \u2014 smooth tipping of our 500 kg dump body. BSP ports matched our EU fittings. Direct sales from the factory saved approximately 25% compared to our previous distributor source. 20 units across 2 orders, all dimensionally correct.<\/p>\n<\/div>\n

\n
\n
B<\/div>\n
\n
Ben W. \u2014 Construction Equipment Rental<\/div>\n
Verified Purchase \u00b7 March 2025<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2606<\/div>\n<\/div>\n

Replaced the tipping cylinder on a ride-on site dumper in our rental fleet \u2014 forward-tipping type, 2-stage, 2.5-inch bore, SAE ports. The original cylinder had a bent rod from an operator impact. Four stars because I initially ordered with the port on the wrong side for a forward-tip mount \u2014 my mistake on the specification, but the factory could have flagged that the port position was unusual for a tipping cylinder. The replacement (correct spec) arrived in 26 days and works perfectly. Lesson learned: specify “forward tip, front mount” explicitly.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Other Hydraulic Cylinder Categories<\/h2>\n
\n
\n

\"Forklift<\/p>\n

\n

Forklift Hydraulic Cylinders \u2192<\/a><\/h3>\n

Lifting, tilt, steering. HCYY OEM part numbers.<\/p>\n<\/div>\n<\/div>\n

\n

\"AWV<\/p>\n

\n

Aerial Work Vehicle Cylinders \u2192<\/a><\/h3>\n

Scissor lift and boom lift \u2014 15 types.<\/p>\n<\/div>\n<\/div>\n

\n

\"All<\/p>\n

\n

All Korea Ever-Power Cylinders \u2192<\/a><\/h3>\n

Complete catalogue.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

Telescopic hydraulic cylinder for mini dump trucks \u2014 micro tippers, electric utility carts, Kei-class commercial vehicles, and sub-3.5 tonne compact haulers. Mini dump trucks operate at the extreme small end of the tipping vehicle spectrum, where the chassis frame is 300\u2013500 mm wide, the dump body holds 0.5\u20132 tonnes, and the entire vehicle may weigh less than what a highway dump truck carries as payload alone. The telescopic cylinder for this class must be proportionally small \u2014 lightweight, narrow in external diameter, and short enough when retracted to fit within a miniature underframe. Direct sales from Korea Ever-Power \u2014 factory to your workshop, no distributor. Custom bore 2\u20136 inch, stroke 4\u2013100 inch. G\/SAE\/NPT\/M ports. ISO 9001. OEM & ODM.<\/div>","protected":false},"featured_media":2274,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[851],"product_tag":[],"class_list":["post-2283","product","type-product","status-publish","has-post-thumbnail","product_cat-telescopic-hydraulic-cylinder","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/product\/2283","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/comments?post=2283"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/media\/2274"}],"wp:attachment":[{"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/media?parent=2283"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/product_brand?post=2283"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/product_cat?post=2283"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/hydrauliccylindersprice.com\/da\/wp-json\/wp\/v2\/product_tag?post=2283"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}